文档资料 许可 在线购买 下载 全部页面 技术资料 产品型号

主页   |   产品   |   支持   |   最终市场   |   技术中心   |   教育与活动   |   公司介绍   |   在线购买

器件   |   设计软件   |   IP   |   设计服务   |   开发套件及配件   |   资料

IP产品    嵌入式处理器    接口与外设           外设           PCI           PCI Express           Memory Controllers           USB           PCMCIA           Ethernet           I2C           CAN           PowerPC Bus           HyperTransport           RapidIO           SerialLite           Additional Functions           Consortiums           资料    DSP    通信     About IP       运用IP进行设计       IP认证       系统设计       申请IP     IP界合作伙伴       AMPP计划       AMPP核合作伙伴

主页 > 产品 > IP > 接口与外设 > CAN > C_CAN 打印此页 订阅电邮新闻 C_CAN from Bosch Features Support for controller area network (CAN) protocol version 2.0 parts A and B Bit rates up to 1 megabit per second (Mbps) Disable feature for automatic retransmission mode for time-triggered CAN applications 32 message objects Each message object has its own identifier mask Programmable first-in first-out (FIFO) mode Maskable interrupt Programmable loop-back mode for self-test operation 16-bit generic interface Block Diagram Figure 1 shows the block diagram for the megafunction. Figure 1. Block Diagram  View full detail (63KB) Description The Altera EDIF Input File (.edf) netlist of the Bosch C_CAN intellectual property (IP) module can be implemented on the Altera® Stratix®, Cyclone®, and APEX™ 20KE FPGA families. The C_CAN megafunction performs communication according to the CAN protocol version 2.0 parts A and B. The bit rate can be programmed to values up to 1 Mbps, depending on the technology used. For the connection to the physical layer, additional transceiver hardware is required. For communication on a CAN network, individual message objects are configured. The message objects and identifier masks are stored in the message RAM. All functions concerning the handling of messages are implemented in the message handler. Those functions are the acceptance filtering, the transfer of messages between the CAN core and the Message RAM, and the handling of transmission requests as well as the generation of the module interrupt. The register set of the C_CAN megafunction can be accessed directly by an external CPU via the module interface. These registers are used to control/configure the CAN core and the message handler and to access the message RAM. The C_CAN module can be connected to a wide range of customer-specific interfaces via its 16-bit generic interface delivered with the C_CAN FPGA netlist. Device Utilization Examples Table 1 lists the typical device utilization results for the megafunction. Table 1. Typical Device Utilization for the Megafunction Target Device Speed Grade Utilization Performance f(MAX) Parameter Setting Logic Elements (LEs) I/O Pins Embedded System Blocks (ESBs) APEX 20K EP20K160EBC356 -1 4515 46 4352 26.38 MHz Contact Bosch Cyclone EP1C6T144C -6 3463 46 4352 36.25 MHz Contact Bosch Stratix EP1S10F484C -5 4276 46 4352 41.49 MHz Contact Bosch Contact Information For additional information, contact Robert Bosch GmbH at: Dept. AE/EIS Tuebinger Strasse 123 72762 Reutlingen GERMANY Tel: +49 7121-35-39711 Fax: +49 71-18-115-14-39711 E-mail: Michael.Rupp4@de.bosch.com http://www.can.bosch.com 给本页评分

请填写反馈意见

主页 | 产品 | 支持 | 最终市场 | 技术中心 | 教育与活动 | 公司介绍 | 在线购买  器件 | 设计软件 | IP | 设计服务 | 开发套件及配件 | 资料  联系我们 | 站点帮助 | 网站导航 | 个人信息 | 法律申明  Copyright © 1995-2008 Altera International Limited, 香港九龙观塘观塘道388号创纪之城1期1座9楼11-18室 Altera, Stratix, Arria, Cyclone, MAX, HardCopy, Nios, Quartus和MegaCore是Altera公司的商标。