Verilog HDL: Hybrid Fixed Coefficient Soft Multiplier
This design implements 2-input, 15-bit fixed coefficient hybrid multiplication using M512 RAM blocks as look-up tables (LUTs). For more details on the design, refer to AN 306: Implementing Multipliers in FPGA Devices.
Download the file(s) used in this example:
Table 1 shows the Hybrid Fixed-Coefficient Soft Multiplier design example port listing.
|
Table 1. Hybrid Fixed-Coefficient Soft Multiplier Port Listing
|
|
Port Name
|
Type
|
Description
|
|
input_I[15..0]
|
Input
|
One of the 16-bit inputs to the multiplier. Two bits of this input are entered into the multiplier every clock cycle till the entire bus is completely loaded.
|
|
input_Q[15..0]
|
Input
|
One of the 16-bit inputs to the multiplier. Two bits of this input are entered into the multiplier every clock cycle till the entire bus is completely loaded.
|
|
sload_data
|
Input
|
Active high. Specifies the start of a new data set and new multiplication operation.
|
|
clk
|
Input
|
Clock
|
|
sclr
|
Input
|
Active high synchronous clear
|
|
result[31..0]
|
Output
|
The output is a 32-bit signed value.
|
|
result_valid
|
Output
|
Indicates when the output is the valid result of a complete multiplication. The signal will go high for the time that the output is valid.
|
For more information on using this example in your project, go to:
Feedback
Did this information help you?
If not, please log onto mySupport to file a technical request or enhancement.
Altera does not warrant that this example will work for the customer's intended purpose and disclaims all liability for use of or reliance on the example.
|
文档资料
> 
