解决方案ID: rd08061999_8834
最后修改: 2008 年5 月20 日
产品类别: 设计软件
产品领域: 板级设计及 I/O
产品子领域: 管脚分配/管理
器件系列: TOOLS

标题

How should I connect my unused APEX^TM 20K or APEX 20KE I/O pins?

说明

You can reserve unused APEX 20K and APEX 20KE I/O pins in the Quartus^® II software in one of the following three ways:

• As inputs, tri-stated - The pins are reserved as input pins.
• As outputs, driving ground - The pins are reserved as output pins and drive the ground signal.
• As outputs, driving an unspecified signal - The pins are reserved as output pins and drive any signal.

To specify which option, select the Unused Pins tab in the Device & Pins Option menu (Compile Settings, Chips & Devices tab).

The unused I/O pins on an APEX device should then be connected or left unconnected according to the option that was used. To verify what option was selected when the design was compiled, go to the Device Options section in the compiler settings file (.csf), report file (.rpt), or pin file (.pin) generated by the Quartus software, and look under the Reserve All Unused Pins section.

---

---

Altera并不保证此解决方案能够达到客户的预期目的，并不承担所有的解决方案的使用和信赖的责任。