FineLine BGA Gerber Files & Layout Guidelines
You can use the example Gerber (.gbr) files and the printed circuit board (PCB) layout files (Accel PCB layout tool) provided on this web site as guidelines for laying out 256-, 484-, and 672-pin FineLine BGA™ packages on your PCB. These files are meant to be a guide only; you should refer to the layout specifications provided by your PCB vendor when actually laying out your PCB.
These Gerber and PCB files route all the I/O pins (except for No Connect pins) on the FineLine BGA package. Separate VCCINT, VCCIO, and GND planes are used to route VCCINT, VCCIO, and GND pins, respectively. Your board layout may be simpler because your design may not use all the I/O pins. Refer to the appropriate readme.txt file (contained in each zip file) for details on the Gerber file extensions.
Download
| Download GBR and PCB Layout Files |
| Pin Count |
Download |
File Size |
| 256-pin FineLine BGA |
256-pin.zip |
44.6 KB |
| 484-pin FineLine BGA |
484-pin.zip |
74.2 KB |
| 672-pin FineLine BGA |
672-pin.zip |
108 KB |
88-pin Ultra FineLine BGA
Only for EPC16 configuration device |
EPC16_gerbers.zip |
4 KB |
Layout Specifications
The following table lists the specifications used in the download files:
| Specifications for 256-, 484- & 672-Pin FineLine BGA Layout Files |
| Specification |
Value |
| I/O pad on PCB |
Pad Size: 15.7 mils |
| Via |
Pad Size: 16 mils
Plated through-hole: 8 mils |
| Trace width |
5 mils |
| Space width |
5 mils |
If you have any questions regarding these files, please visit Altera's mySupport web site, or call the Altera Support Hotline at (800) 800-3753.
|
文档资料
> 
