Altera Home Page
文档资料 许可
在线购买 下载

  主页   |   产品   |   支持   |   最终市场   |   技术中心   |   教育与活动   |   公司介绍   |   在线购买  
  mySupport   |   器件   |   软件   |   IP   |   设计范例   |   参考设计  

 产品
   Quartus II
      SOPC Builder
      MAX+PLUS II
      ModelSim-Altera
  
 资源中心
      简介
      安装&许可
      脚本
       电路板设计& I/O
      网表阅读器 & 综合
      编译增强特性
      优化
      功耗管理
   TimeQuest时序分析器
      标准时序分析器
      仿真 & 确认
      片内调试
      HardCopy设计
  
 软件资源
      操作系统支持
      驱动安装
  
 下载与许可
      下载
   许可
  
 Quartus II EDA 支持
      Quartus II 接口
   综合工具
   仿真工具
   验证工具
   时序分析工具
   再综合工具
   电路板级工具
  
 老版软件EDA支持
      供应商类
      工具类
      功能类
  
主页 > 支持 > 软件 > 驱动安装 > Setting up Programming Hardware in Quartus II Software 打印此页
发送此页

Setting up Programming Hardware in Quartus II Software

Drivers are required for some Altera® programming hardware. If you have not already done so, check the driver information page to determine whether a driver is required. If a driver is required, you should install it before continuing with the steps below.

Quartus II Version 4.2 and later

  1. Start the Quartus® II software.
  2. Choose Programmer from the Tools menu. The Programmer window will open.
  3. Click the Hardware Setup... button to open the Hardware Setup window.
    1. The selected programming hardware is identified as Currently Selected Hardware.
    2. Programming hardware that is already set up appears in the Available hardware items window.
  4. Click the Add Hardware button to open the Add Hardware window if the programming hardware you would like to use is not listed in the Available hardware items window.
    1. Select the appropriate programming cable or programming hardware from the Hardware Type list.
    2. Select the appropriate port and baud rate if necessary.
    3. Click OK.
  5. Select the programming hardware you would like to use by choosing it in the Available hardware items list.
  6. Click Close.
  7. Your programming hardware has been set up.

For detailed information about how to program Altera devices, refer to Quartus II Help.

Quartus II Version 4.0 and 4.1

  1. Start the Quartus II software.
  2. Choose Programmer from the Tools menu. The Programmer window will open.
  3. Click the Hardware Setup... button to open the Hardware Setup window.
    1. The selected programming hardware is identified as Currently Selected Hardware.
    2. Programming hardware that is already set up appears in the Available hardware items window.
  4. Click the Add Hardware button to open the Add Hardware window if the programming hardware you would like to use is not listed in the Available hardware items window.
    1. Select the appropriate programming cable or programming hardware from the Hardware Type list.
    2. Select the appropriate port and baud rate if necessary.
    3. Click OK.
  5. Select the programming hardware you would like to use by clicking on it in the Available hardware items window then clicking the Select Hardware button. Your choice will be listed as the Currently Selected Hardware.
  6. Click Close.
  7. Your programming hardware has been set up.

For detailed information about how to program Altera devices, refer to Quartus II Help.

Quartus II Version 3.0

  1. Start the Quartus II software.
  2. Choose Programmer from the Tools menu. The programmer window will open.
  3. Click the Hardware button to open the Hardware Setup window.
    1. The selected programming hardware is identified as Currently Selected Hardware.
    2. Programming hardware that is already set up appears in the Available hardware items window.
  4. Click the Add Hardware button to open the Add Hardware window if the programming hardware you would like to use is not listed in the Available hardware items window.
    1. Select the appropriate programming cable or programming hardware from the Hardware Type list.
    2. Select the appropriate port and baud rate if necessary.
    3. Click OK.
  5. Select the programming hardware you would like to use by clicking on it in the Available hardware items window then clicking the Select Hardware button. Your choice will be listed as the Currently Selected Hardware.
  6. Click Close.
  7. Your programming hardware has been set up.

For detailed information about how to program Altera devices, refer to Quartus II Help.

Quartus II Version 2.2

  1. Start the Quartus II software
  2. Choose Programmer from the Tools menu. The programmer window will open
  3. Click the Setup button to open the Programming Hardware Setup window.
    1. The selected programming hardware is identified as Currently Selected Hardware.
    2. Programming hardware that is already set up appears in the Available hardware items window.
  4. Click the Add Hardware button to open the Add Hardware window if the programming hardware you would like to use is not listed in the Available hardware items window.
    1. Select the appropriate programming cable or programming hardware from the Hardware Type list.
    2. Select the appropriate port and baud rate if necessary.
    3. Click OK.
  5. Select the programming hardware you would like to use by clicking on it in the Available hardware items window then clicking the Select Hardware button. Your choice will be listed as the Currently Selected Hardware.
  6. Click Close.
  7. Your programming hardware has been set up.

For detailed information about how to program Altera devices, refer to Quartus II Help.

Quartus II Version 2.1

  1. Start the Quartus II software.
  2. Choose Open Programmer from the Processing menu. The programmer window will open.
  3. Click the Setup button to open the Programming Hardware Setup window.
    1. The selected programming hardware is identified as Currently Selected Hardware.
    2. Programming hardware that is already set up appears in the Available hardware items window.
  4. Click the Add Hardware button to open the Add Hardware window if the programming hardware you would like to use is not listed in the Available hardware items window.
    1. Select the appropriate programming cable or programming hardware from the Hardware Type list.
    2. Select the appropriate port and baud rate if necessary.
    3. Click OK.
  5. Select the programming hardware you would like to use by clicking on it in the Available hardware items window then clicking the Select Hardware button. Your choice will be listed as the Currently Selected Hardware.
  6. Click Close.
  7. Your programming hardware has been set up.

For detailed information about how to program Altera devices, refer to Quartus II Help.

Quartus II Version 2.0 and Earlier

  1. Start the Quartus II software.
  2. Choose Open Programmer from the Processing menu. The programmer window will open.
  3. Click the Setup button to open the Programming Hardware Setup window.
    1. The selected programming hardware is identified as Currently Selected Hardware.
    2. Programming hardware that is already set up appears in the Hardware/Port window.
  4. Click the Add button to open the Add Hardware window if the programming hardware you would like to use is not listed in the Hardware/Port window.
    1. Select the appropriate programming cable or programming hardware from the Hardware Type list.
    2. Select the appropriate port and baud rate if necessary..
    3. Click OK
  5. Select the programming hardware you would like to use by double-clicking it in the Hardware/Port window. Your choice will be listed as the Currently Selected Hardware.
  6. Click Close.
  7. Your programming hardware has been set up.

For detailed information about how to program Altera devices, refer to Quartus II Help.

给本页评分

  请填写反馈意见
  注册索取最新邮件通知


主页 | 产品 | 支持 | 最终市场 | 技术中心 | 教育与活动 | 公司介绍 | 在线购买 
mySupport | 器件 | 软件 | IP | 设计范例 | 参考设计 

联系我们 | 站点帮助 | 网站导航 | 个人信息 | 法律申明 
Copyright © 1995-2008 Altera International Limited, 香港九龙观塘观塘道388号创纪之城1期1座9楼11-18室
Altera, Stratix, Arria, Cyclone, MAX, HardCopy, Nios, Quartus和MegaCore是Altera公司的商标。