Entering Resource Assignments
The
MAX+PLUS® II software allows you to enter a variety of resource and device assignments for your projects. Resource assignments are used to assign logic functions to a particular pin, logic cell, I/O cell, embedded cell, row, column, Logic Array Block (LAB), Embedded Array Block (EAB), chip, clique, local routing, logic option, timing requirement, or connected pin group. In MAX+PLUS II software, you can enter all types of resource and device assignments with Assign menu commands. You can also enter pin, logic cell, I/O cell, embedded cell, LAB, EAB, row, and column assignments in the MAX+PLUS II Floorplan Editor. The Assign menu commands and the Floorplan Editor all save assignment information in the ASCII Assignment & Configuration File (.acf) for the project. In addition, you can edit ACFs manually in any standard text editor or with the setacf utility.
Concept & Composer Schematics
In both Concept and Composer schematics, you can assign a limited subset of these resource assignments by assigning properties to symbols. These properties are incorporated into the EDIF netlist file(s). The MAX+PLUS II software automatically converts assignment information from the EDIF Input File into the ACF format. For information on making MAX+PLUS II-compatible resource assignments, go to the following topics:
Go to the Cadence Concept Schematic User Guide and Composer Reference User Guide for details on how to assign properties. Go to "Resource Assignments in EDIF Input Files" and "Assigning Resources in a Third-Party Design Editor" in MAX+PLUS II Help for more information on assignments or properties that can be assigned in Concept and Composer.
Installing the Altera-provided MAX+PLUS II/Cadence interface on your computer automatically creates the following sample Concept and Composer schematic files, which include resource assignments:
- /usr/maxplus2/examples/cadence/example6/fa2 (Concept)
- /usr/maxplus2/examples/cadence/example7/fa2 (Composer)
VHDL & Verilog HDL Design Files
For Verilog HDL- and VHDL-based designs, you must use the MAX+PLUS II software or the setacf utility to enter resource assignments. For information on using the setacf utility, go to Modifying the Assignment & Configuration File with the setacf Utility.
Related Topics:
- For information on entering assignments in the MAX+PLUS II software with Assign menu commands or in an ACF, go to "resource assignments" or "ACF, format" in MAX+PLUS II Help using Search for Help on (Help menu).
Feedback
Did this information help you?
If no, please log onto mySupport to file a technical request or enhancement.
Altera does not warrant that this solution will work for the customer's intended purpose and disclaims all liability for use of or reliance on the solution.
|
文档资料
> 
